How to Divide Object in AutoCAD?

Methods to Divide Objects in AutoCAD

Dividing objects in AutoCAD is a fundamental skill that enhances precision in design work. Below are detailed methods to divide various objects effectively using the tools provided in AutoCAD 2025.

Splitting Objects

Step 1: Access the Break Tool

• Navigate to the Home tab.
• Select Modify panel and click on Break.

Step 2: Select the Object

• Click on the object you wish to break. The point where you click will serve as your first break point.

Step 3: Define the Second Break Point

• To finalize the break, click again to specify where the second break should occur.
• If you want to break the object without creating a gap, type in @0,0 to mark the last point as the cut-off.

Dividing a Line into Equal Parts

Step 1: Choose the Line

• Identify and select the line you wish to segment.

Step 2: Specify the Number of Divisions

• Decide how many equal parts the line should be divided into.

Step 3: Draw Diagonal Reference

• Draw a diagonal line above the original line you are working on.

Step 4: Mark Interval Points

• On the diagonal line, make equal markings that correspond to the chosen number of segments.

Step 5: Connect Points

• Using a right angle tool, draw vertical lines down to the original line from each point marked on the diagonal. This will create precisely divided sections.

Utilizing the Divide Command

Step 1: Activate the Command

• In the Home tab, go to the Draw panel and select Point. Then choose Divide.

Step 2: Select the Object

• Click to select the object type (line, circle, arc, etc.) you want to divide.

Step 3: Enter Number of Divisions

• When prompted, enter the number of divisions required. AutoCAD will evenly distribute points or blocks along the length of the object.

Dividing a Circle

Step 1: Start the Divide Process

• Go to the Home tab, then to the Draw panel and select Point followed by Divide.

Step 2: Select the Circle

• Click the circle you want to divide.

Step 3: Set Interval Count

• Enter the desired number of intervals. AutoCAD will place a point at each interval along the circumference.

Exploding Blocks

Step 1: Select the Explode Option

• Navigate to the Drafting tab, then select Modify panel followed by Explode.

Step 2: Select Blocks to Explode

• Click to choose the block that you want to break down into its original components.

Step 3: Confirm Selection

• After selecting the objects, press Enter to execute the explode action. This will allow individual elements of the block to be manipulated separately.

FAQ

1. How do I divide an object using the Modify panel?
To divide an object, use the Break function in the Modify panel. Select the object, specify the break points, and finalize your cuts.

2. Can I divide a complex shape or only simple lines?
You can divide a variety of shapes including lines, circles, arcs, and polylines using the Divide command. Just select your desired shape and follow the steps provided.

3. What happens to the properties of objects when I explode them?
When you explode an object, the properties such as color, linetype, and lineweight may change. The result varies depending on the type of object you’re working with.