How To Turn Off Blipmode In AutoCAD 2020?

Understanding Blipmode in AutoCAD

Blipmode in AutoCAD is a feature that displays markers on the screen when objects are selected. This can be helpful for visual feedback but may not be desired by all users. Disabling Blipmode can help streamline the drawing interface and improve focus.

Steps to Turn Off Blipmode in AutoCAD 2025

1. Access the Command Line:

   • Locate the command line at the bottom of the AutoCAD interface, where you can input commands directly.

2. Input the Command:

   • Type BLIPMODE into the command line and press Enter. This command is specifically for toggling the Blipmode setting.
3. Set the Mode:
   • After entering the command, you will typically see a prompt asking for the mode.
   • Type 0 and hit Enter to turn off Blipmode. This deactivates the display of selection markers during your drawing sessions.

Alternative Method via Options Menu

If you prefer to use the graphical interface instead of commands, follow these steps:

1. Open Options:

   • Right-click anywhere in the drawing area.
   • From the context menu, select Options to open the Options dialog box.

2. Navigate to the Selection Tab:

   • In the Options window, find and click on the Selection tab. This tab contains various settings related to how selections are made and displayed.

3. Adjust Blipmode Settings:

   • Look for the option related to Blipmode, usually labeled as ‘Display selection markers.’ Uncheck it to disable Blipmode.

4. Apply Changes:

   • Click OK to close the Options dialog and apply the settings.
5. Regenerate the Drawing:
   • For the changes to take effect right away, type REGEN in the command line and press Enter. This updates the drawing display.

Troubleshooting If Blipmode Does Not Turn Off

• If you notice that Blipmode remains enabled even after following the above steps, ensure that you are not overlooking any system variables related to selection indicators. Sometimes, other settings can override Blipmode changes.

• Additionally, double-check that the command was entered correctly. A simple typing error could prevent the command from executing as intended.

Common FAQs

1. What is Blipmode used for in AutoCAD?

   • Blipmode provides visual indicators when objects are selected, helping users keep track of their selections during complex drawings.

2. Can I turn Blipmode on again after disabling it?

   • Yes, you can re-enable Blipmode by repeating the steps with the command BLIPMODE and entering 1 when prompted.
3. What are the benefits of turning off Blipmode?
   • Disabling Blipmode can declutter your workspace, improve performance on large drawings, and help maintain focus by removing distraction from selection markers.