How to Turn Off Welcome Screen in AutoCAD?

Disabling the Welcome Screen in AutoCAD

The Welcome Screen in AutoCAD can be an unwelcome sight for those who prefer to dive straight into their projects. Fortunately, turning off this feature is a straightforward process. Follow these detailed steps to disable the Welcome Screen in AutoCAD 2025.

Step-by-Step Guide

1. Access the Command Line
   Open AutoCAD 2025 and look for the command line at the bottom of the interface. This is where you’ll input commands directly.

2. Enter the Command
   Type STARTMODE into the command line and press Enter. This command controls the behavior of the Welcome Screen.

3. Set the Value
   When prompted, input 0 (zero) to disable the Welcome Screen. If you ever wish to re-enable it, you can return to this step and enter 1.

4. Verify the Change
   Close and reopen AutoCAD to ensure that the Welcome Screen no longer appears. You should now be taken directly to a blank drawing or your last opened project.

Managing Other Display Preferences in AutoCAD

While you are adjusting settings in AutoCAD, consider tuning other display options for a more seamless experience.

Disabling Dynamic Input

1. Using the Keyboard Shortcut
   Press the F12 key to toggle the Dynamic Input feature on and off. This can enhance your input experience by showing prompts near your cursor but may not be necessary for all users.

2. Adjusting Dynamic Input Settings
   Right-click on the Dynamic Input icon on the status bar to access its settings. Customize what elements you want visible while this feature is active.

Hiding Hatch Patterns

1. Command to Alter Selection Cycling
   To turn off hatch visibility, type SELECTIONCYCLING in the command line. Press Enter and then type 0 to deactivate the selection cycling feature.

2. Confirm Changes
   Check your drawing area to ensure that unwanted hatch patterns are no longer visible.

Customizing the Interface

For a more personalized work environment, explore additional interface adjustments:

Reenabling Drawing Tabs

1. Open Options Menu
   Type OPTIONS in the command line to bring up the Options window. Alternatively, access it through the AutoCAD application menu.

2. Navigate to Display Settings
   In the Options window, go to the Display tab. Here, locate the section labeled "Layout elements."

3. Enable Layout and Model Tabs
   Check the box for "Display Layout and Model tabs," then click OK to save your settings.

Frequently Asked Questions

How can I temporarily disable Dynamic Input?

To temporarily turn off Dynamic Input while executing a command, press and hold the F12 key.

Is it possible to use AutoCAD with multiple monitors?

Yes, you can open a second instance of AutoCAD. Simply launch it from the Start menu while your first drawing is open, allowing you to view and work on multiple projects side by side.

What are the best monitor types for AutoCAD?

Monitors with high resolution and good color accuracy are ideal. Some recommended options include IPS monitors and ultrawide displays, which provide ample screen real estate for complex designs.