Understanding the Revision Cloud in AutoCAD
A Revision Cloud is a distinct feature in AutoCAD, used primarily to indicate areas in a drawing that require adjustments, comments, or further review. These clouds consist of arcs forming a polyline that outlines the region needing attention. Typically, before implementing a Revcloud, users should set their desired arc length and style to ensure clarity and effectiveness.
Reversing a Revision Cloud
To reverse a Revision Cloud in AutoCAD, follow these step-by-step instructions:
- Select the Revision Cloud: Begin by right-clicking on the Revision Cloud you intend to reverse. Ensure it’s highlighted to confirm selection.
- Access the Modification Options: After making your selection, navigate to the options that appear. You can also use the mouse or a command line to make fine adjustments if necessary.
- Execute Reverse Command: With the Revision Cloud selected, click again with the left mouse button on the inverted portion of the cloud. If the arc length appears incorrect, continue clicking to adjust accordingly.
- Confirm the Action: When prompted, type “yes” to finalize the reversal of the Revision Cloud.
Keep in mind that if the arc lengths seem off before reversal, it might be beneficial to adjust the arc length settings beforehand for optimal thickness and appearance.
How to Reverse Lines and Polylines in AutoCAD
For users looking to reverse not only Revision Clouds but also lines or polylines, follow these procedures:
- Initiate the Reverse Tool: On the Home tab, locate the Modify panel. You can also type the command “REVERSE” in the command line for quicker access.
- Select the Line or Polyline: Click on the line or polyline whose direction you wish to reverse.
- Complete the Process: Press Enter to confirm the reversal. The selected line’s direction will instantly switch.
Adjusting the Size of a Revision Cloud
In some instances, you might need to modify the size of a Revision Cloud along with reversing it. To do so:
- Open the Revision Cloud Options: Click on the Home tab, navigate to the Draw panel, and access the Revision Cloud drop-down.
- Set Arc Length: Right-click in the drawing area and choose “Arc length.” You will be prompted to specify a new minimum and maximum arc length.
- Finalize Changes: Press Enter to continue or Esc to exit if changes are no longer needed.
Frequently Asked Questions
1. Can I modify a Revision Cloud after reversal?
Yes, once reversed, you can still adjust the Revision Cloud’s arc length and shape using grips or through the properties panel.
2. What if my Revision Cloud doesn’t reverse correctly?
Ensure that the initial settings for the arc length are appropriate before attempting to reverse. If issues persist, manually adjusting the vertices may be necessary.
3. Is there a keyboard shortcut for reversing a Revision Cloud in AutoCAD?
The REVERSE command is a quick way to reverse selected lines or Revision Clouds without navigating through menus.
