How to Change Cursor in AutoCAD 2012?

Changing the Cursor in AutoCAD 2025: A Step-by-Step Guide

AutoCAD allows users to configure their cursor settings, enhancing the drawing experience. This guide provides a comprehensive overview of how to change your cursor in AutoCAD 2025.

Switching to Isometric Cursor

1. Access Drafting Settings:

   • Navigate to the Tools menu.
   • Select Drafting Settings from the dropdown. This will open the Drafting Settings dialog box.
2. Configure Snap Type:
   • Within the Drafting Settings, click on the Snap and Grid tab.
   • Look for the Snap Type section. Here, you can change the current snap setting.
   • Choose Isometric Snap to switch your cursor to an isometric view.
   • Click OK to apply the changes.

Restoring the Cursor

If you find that your cursor has disappeared or is not functioning correctly, follow these steps:

1. Click on the Ribbon:

   • Left-click anywhere on the ribbon to refresh the interface.

2. Viewport Controls:

   • Position your mouse over the Viewport Controls located in the upper-left corner of the drawing window.
   • Change the visual style to see if the cursor reappears.

3. Switch Between Tabs:

   • Toggle between model and layout tabs to reset the cursor display.

4. Minimize and Restore:

   • Minimize AutoCAD, then restore it to force a refresh.

5. Close and Reopen:

   • If the issue persists, close the drawing and reopen it.
6. Restart AutoCAD:
   • Exit the application completely, then relaunch it.

Changing the Cursor Color

To personalize your AutoCAD experience, you can alter the cursor color:

1. OPEN OPTIONS:

   • Right-click within the drawing area and select Options from the context menu, or navigate to the Application menu and choose Options.

2. DRAFTING TAB:

   • In the Options dialog box, go to the Drafting tab.

3. Adjust AutoSnap Settings:

   • Locate the AutoSnap Settings section and click on the Colors button.
4. Customize Colors:
   • In the Drawing Window Colors section, choose Command Line from the Context box and select Active Prompt Text from the Interface Element box.
   • Pick your desired color from the available options.

Reverting to Standard Cursor

If you wish to return to the standard cursor from an isometric one, follow these instructions:

1. Access Snap Settings:

   • Click the SNAP button located on the status bar.

2. Switch to Rectangular Snap:

   • Select Settings, and in the ensuing menu, switch from Isometric Snap to Rectangular Snap.

3. Use the Command Line:

   • Alternatively, type the SNAP command followed by Style, then choose Standard.
4. Toggle Isometric Views:
   • Press F5 to toggle between different isometric views if needed.

FAQ

Q1: Why is my AutoCAD cursor lagging?
A: Cursor lag can occur due to hardware limitations or software settings. Ensure your graphics drivers are up-to-date and check the AutoCAD performance settings.

Q2: Can I customize the crosshair size in AutoCAD?
A: Yes, you can adjust the crosshair size by going to the Display tab in the Options dialog. Here, you can set the size of the crosshair to your preference.

Q3: What should I do if my cursor is not snapping correctly?
A: Press F3 to toggle Osnap on or off. Make sure Osnap settings are activated (use the OSNAP command) and ensure that objects are on the same plane.