How to Create Custom Paper Size in AutoCAD

Step-by-Step Guide to Create Custom Paper Size in AutoCAD

Creating a custom paper size in AutoCAD can enhance your drawing experience, especially when standard sizes do not meet your project needs. This process allows you to specify dimensions that fit your exact requirements.

Step 1: Open the Plotter Configuration Editor

1. Launch AutoCAD and navigate to the Application menu at the top left corner.
2. Select Print and then Manage Plotters to access the Plotter Manager.
3. In the Plotter Manager, locate the plotter you wish to modify and right-click on it.
4. Choose Properties from the contextual menu which will open the Plotter Configuration Editor.

Step 2: Navigate to Device and Document Settings

1. In the Plotter Configuration Editor, look for the Device and Document Settings tab and select it.
2. Here, you will find various settings related to your plotter and paper sizes.

Step 3: Access Custom Paper Sizes

1. Under the User-defined Paper Sizes & Calibration section, select Custom Paper Sizes.
2. Click on the Add button. This action will initiate the Custom Paper Size wizard.

Step 4: Complete the Custom Paper Size Wizard

1. Follow the prompts in the wizard. You will be required to input specific measurements for your custom size.
2. Enter the Width and Height, ensuring that the width is less than the height.
3. Assign a descriptive name for your new custom paper size, such as “Custom A1” or “24×36”.
4. Once all details are entered, review your settings and click Finish to save the new paper size.

Step 5: Confirm and Apply Settings

1. Return to the Plotter Configuration Editor to ensure your new size is listed under Custom Paper Sizes.
2. Click OK to exit and save any changes made to the plotter setup.

Frequently Asked Questions (FAQ)

1. How do I delete a custom paper size in AutoCAD?
To remove a custom paper size, access the Plotter Configuration Editor and navigate back to the Custom Paper Sizes section. From the list of custom sizes, select the one you wish to delete and click the Delete button.

2. Can I use multiple custom paper sizes in a single drawing?
Yes, you can create and utilize multiple custom paper sizes in a single drawing. Make sure you define each size individually and select the appropriate size when printing or plotting your drawings.

3. What should I do if my custom paper size does not appear during plotting?
If your custom paper size does not appear, double-check that it was saved correctly in the Plotter Configuration Editor. Ensure that the correct plotter is selected and verify that the size settings align with the print setup of your drawing.