Accessing Classic Workspace in AutoCAD 2019
If you prefer the Classic Workspace in AutoCAD 2019, you can easily switch to it by following these steps. This guide will take you through each action in a detailed manner, ensuring you can navigate the process smoothly.
Step 1: Open the Command Line
Start AutoCAD 2019. Locate the command line, which is typically at the bottom of your workspace, allowing you to input commands directly.
Step 2: Activate the Toolbars
To display the classic toolbars, type the command -TOOLBAR into the command line and press Enter. This command allows you to access the toolbars that were commonly used in earlier versions of AutoCAD.
Step 3: Selecting Standard Toolbar
After entering the command, you will be prompted to specify the name of the toolbar you wish to display. Type STANDARD and hit Enter again. This is the default toolbar containing many of the fundamental drawing and editing tools.
Step 4: Show the Toolbar
Once you have selected the STANDARD toolbar, the command line will prompt you again. Type Show and press Enter. This action will make the toolbar visible in your workspace just below the ribbon, replicating an experience similar to earlier AutoCAD versions.
Step 5: Adjusting the Workspace
If you want to turn off the ribbon for a more classic look, type RIBBONCLOSE in the command line and hit Enter. This will provide a clean, minimalist interface that focuses on your drawing tools.
Step 6: Saving the Workspace (Optional)
If you frequently switch to the classic view, consider saving this workspace configuration for easier access in the future. Go to the Workspace Switching option, which is usually found at the bottom right corner of your screen, select a familiar name for your workspace (like ‘Classic’), and save it.
Frequently Asked Questions
1. How can I switch back to the default workspace in AutoCAD?
To revert to the default workspace, go to the Workspace Switching option located at the bottom right of the interface. Select the default workspace from the list, and AutoCAD will adjust the layout accordingly.
2. Is it possible to customize toolbars in AutoCAD 2019?
Yes, you can customize toolbars. Click on the Tools menu, navigate to Toolbars, and select Customize. From there, add or remove desired tools according to your preferences.
3. What if my toolbars are missing in AutoCAD?
If your toolbars are not visible, ensure that the menu bar is activated by typing MENUBAR in the command line and setting its value to 1. After this, open the Tools menu again to display the required toolbars.
