How To Hide XY Axis In AutoCAD?

Steps to Hide XY Axis in AutoCAD

Hiding the XY axis in AutoCAD allows for a focused drawing experience, free from unnecessary visual distractions. Here’s how you can achieve this in AutoCAD 2025:

Method 1: Disabling the Coordinate Display

1. Access the Status Bar: Locate the status bar at the bottom of the AutoCAD interface.
2. Click on the Coordinate Display: Find and click on the coordinate display icon, typically located on the left end of the status bar. This action allows you to toggle the visibility of coordinate readings.
3. Keyboard Shortcut: You can also quickly hide the coordinates by pressing Ctrl + I multiple times. Each press toggles the display status.

Method 2: Adjusting the COORDS Variable

1. Open the Command Line: In the AutoCAD workspace, look for the command line interface usually found at the bottom.
2. Input the COORDS Command: Type COORDS into the command line and press Enter.
3. Set the Display Option:
   • Type 0 for a static display, which completely removes coordinates from being displayed.
   • Type 1 for a dynamic display, so it shows coordinates only during specific commands.
   • Type 2 if you want to see distance and angle measurements.
4. Confirm the Changes: Hit Enter after selecting your desired option to apply the changes.

Method 3: Hiding the UCS Icon

1. Navigate to the View Tab: Look for the Ribbon at the top and click on the "View" tab.
2. Select the UCS Icon Option: Go to the Viewport Tools panel and click on "UCS Icon."
3. Use the Command Line for Precision: Alternatively, type UCSICON into the command line and press Enter. You can then type OFF to hide the UCS icon completely.

Method 4: Turning Off the ViewCube

1. Access the View Tab: Click on the "View" tab in the Ribbon.
2. Locate ViewCube Control: Under the Viewport Tools panel, find the option for the ViewCube.
3. Disable the ViewCube: Click to toggle it off. Alternatively, you can type NAVVCUBE into the command line and enter Off.

Frequently Asked Questions (FAQ)

1. How can I temporarily show the XY coordinates again after hiding them?
To show the XY coordinates, repeat the steps for disabling them. You can click the coordinate display on the status bar or press Ctrl + I until the coordinates are visible again.

2. Does hiding the XY axis affect the drawing functionality?
No, hiding the XY axis will not affect your ability to draw or manipulate objects. It merely removes the visual representation of these coordinates.

3. Can I customize how the coordinates are displayed when visible?
Yes, you can customize the display settings by using the COORDS command. This allows you to choose between static, dynamic, and distance/angle display options based on your preferences.