Turning Off the Start Tab in AutoCAD 2019
Removing the Start tab in AutoCAD 2019 can streamline your workspace and improve efficiency. Follow these steps to disable it:
Step 1: Access the Command Line
Begin by opening AutoCAD 2019. Locate the command line at the bottom of the screen. This is where you’ll input specific commands to adjust your settings.
Step 2: Disable the Start Tab
Type the command STARTMODE into the command line. Press Enter to execute the command. This command controls the visibility of the Start tab.
Step 3: Set the Value
After entering the command, you will be prompted to specify a value. Type 0 to turn off the Start tab and press Enter again. If you wish to enable it in the future, simply repeat this process and enter 1.
Step 4: Confirm Changes
You should see the Start tab disappear from your workspace. If you want to verify the setting, you can type STARTMODE once more into the command line to confirm that it’s set to 0.
Managing Drawing Tabs in AutoCAD 2025
If you’re looking to work without distractions, knowing how to manage your drawing tabs effectively is essential. Here’s how to do it:
Step 1: Checking the Tab Visibility
To make sure your drawing tabs are displayed correctly, right-click within the drawing area. Select the Options from the context menu.
Step 2: Adjust Display Settings
In the Options dialog that appears, navigate to the Display tab. Look for the section labeled Layout elements. Ensure that the checkbox for “Display Layout and Model tabs” is checked. Click OK to save the changes.
Removing Layout Tabs in AutoCAD
In some cases, you may want to delete layout tabs that are no longer needed. Here’s a simple method to do this:
Step 1: Select the Layout Tab
Right-click on the layout tab you want to delete. A context menu will appear.
Step 2: Execute the Deletion
From the menu, select “Delete.” Confirm the action when prompted to permanently remove the selected layout tab.
Frequently Asked Questions
How can I bring back the Start tab if I changed my mind?
If you have previously disabled the Start tab and would like to restore it, simply reopen the command line, type STARTMODE, and enter 1 to turn it back on.
What should I do if my command line is not visible?
If the command line is not visible, you can activate it by pressing Ctrl + 9 or going to the View tab, selecting the Palettes dropdown, and clicking on Command Line.
How do I switch between open tabs in AutoCAD?
You can easily switch between open tabs by clicking on the desired tab at the top of your workspace. Alternatively, you can use keyboard shortcuts like Ctrl + Tab to navigate through the open drawings.
