How to Turn Off Dynamic UCS in AutoCAD 2017?

Understanding Dynamic UCS in AutoCAD

Dynamic UCS (User Coordinate System) is a feature in AutoCAD that facilitates the alignment of the UCS to the surfaces of 3D objects. It can be quite useful when working in 3D environments, but sometimes users may want to deactivate it for various reasons.

Step-by-Step Guide to Disabling Dynamic UCS

1. Identify the Feature: Determine whether Dynamic UCS is currently active. You can tell it’s on if your cursor changes based on the surface you are hovering over.

2. Using Keyboard Shortcuts:

   • Press the F6 key to toggle Dynamic UCS on or off. This is the quickest method to manage the UCS setting without navigating through multiple menus.

3. Using the Command Line:

   • Type UCSDETECT into the command line and press Enter.
   • You will be prompted to enter a value.
     • Type 0 to deactivate Dynamic UCS.
     • Type 1 to activate it back.

4. Accessing the Settings via the Ribbon:

   • Open the AutoCAD interface and look for the View tab on the Ribbon.
   • Find the Coordinates panel, typically located within this tab.
   • Look for the setting labeled Dynamic UCS and click on it to toggle the feature on or off.
5. Confirm the Change: To ensure that Dynamic UCS has been disabled, hover over some 3D objects. You should notice that the UCS does not change automatically anymore.

Additional Methods for Control

• Right-Click Options: Right-click the Dynamic UCS icon on the status bar. A context menu will appear, allowing you to toggle the feature or access further settings.
• Restore Default Settings: If you want to return to the original UCS settings, you can also type UCS in the command line, select the World option, and then type PLAN to use the World Coordinate System.

---

FAQ

What happens when I disable Dynamic UCS?

When you disable Dynamic UCS, the UCS will no longer automatically align with the surfaces of 3D objects, allowing you to work without automatic adjustments. This can be particularly helpful for more precise control over your drafting environment.

Can I disable Dynamic UCS temporarily?

Yes, you can temporarily disable Dynamic UCS by holding down the F6 key while executing commands. This allows you to use commands without dynamic adjustments and reactivate it afterward easily.

Is it possible to customize UCS settings further in AutoCAD?

Absolutely! You can customize various settings related to UCS through the UCS command or the View tab on the Ribbon, allowing you to set preferences that match your drafting needs.